Memory Module - Epson AcuLaser C8600 Reference Manual

Memory Module

Increasing the printer's memory allows you to print complex or
graphics-intensive documents. You can increase printer memory
up to 1 GB by installing optional Dual In-line Memory Modules
(DIMMs).
This printer has two DIMM slots, but one slot has a 64 MB DIMM
already installed in it at the time of manufacture. To increase
printer memory to its maximum of 1 GB, you have to purchase
two 512 MB DIMMs and remove the original 64 MB DIMM.
You can purchase DIMMs from various vendors. Be sure they
meet the following requirements.
DRAM type
Memory size
Type
Clock frequency
CAS Latency
Height
* SPD stands for Serial Presence Detect, a chip residing on the memory module that
contains information about the size, speed, and other specifications of the memory
as well as manufacturer information that can be retrieved by the motherboard
through electronic signals.
Note:
The total printer memory is the standard 64 MB plus the optional
DIMM. For example, if you install an optional 32 MB DIMM, the total
printer memory is 96 MB.
Synchronous Dynamic RAM Dual In-line
Memory Module (SDRAM DIMM)
64, 128, 256, or 512 MB
168-pin type, 64 bit, with SPD*
100 MHz or higher (10 ns or less)
CL=2
Less than 40 mm
Using Options
7
7
7
7
7
7
7
7
7
7
7
7
235