Replacing the Paper Cutter
When the paper cutter does not cut cleanly, it may be blunt and
require replacement.
Warning:
w
Be careful not to cut yourself while replacing the paper cutter.
To check the product code of the Auto Cutter Spare Blade, see
"Consumable Products" on page 375.
To replace the paper cutter, follow the steps below.
1. Make sure the printer is on.
2. Press the Menu
3. Press the Paper Feed
CUTTER REPLACE on the LCD.
Note:
You can also take the following steps.
Press the Paper Feed
MAINTENANCE on the LCD. Press the Menu
press the Paper Feed
CUTTER REPL.
4. Press the Menu
button again. The paper cutter holder moves to the
replacement position.
c
310
Maintenance and Transportation
button to enter the SelecType mode.
button to display EXEC. Press the Menu
Caution:
Never move the paper cutter holder by hand; otherwise,
damage to your printer may occur.
or Paper Feed
or Paper Feed
or Paper Feed
button to display
button to display
button, and then
button to display