Printing A Status Sheet; Setting The Alert Value Of The Paper - Epson Stylus Pro 4400 Reference Manual

5. Press the Menu
you selected appears on the LCD.
6. Press the Pause

Printing a status sheet

In the SelecType mode, you can print a status sheet to see the
current SelecType default values. To print a status sheet, follow
the steps below.
1. Make sure that paper is loaded in the printer.
2. Press the Menu
3. Press the Paper Feed
TEST PRINT, and then press the Menu
4. Press the Paper Feed
STATUS CHECK, and then press the Menu
5. Press the Menu
sheet.
After printing is finished, the printer exits the SelecType mode
and returns to the READY status.

Setting the alert value of the paper

You can get a message when there is not much left, by setting the
alert value using the steps below.
Note:
This setting is available only when you select Roll Paper or Cut Sheet
for PAPER COUNTER in the Maintenance mode.
256
The Control Panel
button. If you select No. X, the number
button to exit the SelecType mode.
button to enter the SelecType mode.
or Paper Feed
or Paper Feed
button again to start printing a status
button to display
button.
button to display
button.