Usb Board - HP Pavilion g7 Maintenance And Service Manual

USB board

Description
USB board (includes cable)
Before removing the USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
Remove the USB board:
1. Release the ZIF connector (1) to which the USB board cable is connected, and then disconnect
the USB board cable (2) from the system board.
2. Release the clip (3) built into the base enclosure that secures the USB board to the base
enclosure.
3. Remove the USB board (4) and cable.
Battery on page 37), and then remove the following components:
Optical drive on page
Hard drive or SSD on page
Keyboard on page 47)
Top cover on page 50)
39)
41)
Component replacement procedures
Spare part number
640211-001
59