Speakers
Description
Speaker Kit (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
Remove the TouchPad LED board and cable:
1.
Disconnect the speaker cable (1) from the system board.
2.
Remove the speakers (2).
Reverse this procedure to install the speakers.
Battery on page
37), and then remove the following components:
Optical drive on page
Hard drive or SSD on page
Keyboard on page
47)
Top cover on page
50)
39)
41)
Component replacement procedures
Spare part number
641396-001
57