Removing The Shock Absorber; Installing Shock Absorber; Removing The Seat; Mounting The Seat - KTM 65 SX Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.18

Removing the shock absorber

11.19

Installing shock absorber

11.20

Removing the seat

11.21

Mounting the seat

x
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove screw
without blocking the rear wheel. Fix the rear wheel in this position.
–
Remove screw
absorber.
602676-10
x
Main work
–
Push splash protector
tighten screw
Guideline
Screw, top shock absorber
–
Mount and tighten screw
Guideline
602676-11 Screw, bottom shock absorber
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Open quick release
–
Pull back the seat and remove it.
602681-10
–
Hook the seat onto screw
Projection
602682-10
and lower the rear wheel with the swingarm as far as possible
1
, push splash protector
2 3
to the side and position the shock absorber. Mount and
1
.
2
.
3
and raise the rear of the seat.
1
and lower the seat at the rear while pushing it forward.
1
hooks into the fuel tank.
2
p. 27)
to the side, and remove the shock
M10 45 Nm
(33.2 lbf ft)
M10 45 Nm
(33.2 lbf ft)
p. 27)
35