11.4.2 Physical Characteristics; 11.4.3 Connector Requirements; 11.4.4 Electrical Description; 11.4.5 Pin Descriptions - Seagate ST900MM0006 Product Manual

11.4.2 Physical characteristics

This section defines physical interface connector.

11.4.3 Connector requirements

Contact your preferred connector manufacturer for mating part information. Part numbers for SAS connectors will be
provided in a future revision of this publication when production parts are available from major connector manufacturers.
The SAS device connector is illustrated in Figures 20 and 21.

11.4.4 Electrical description

SAS drives use the device connector for:
• DC power
• SAS interface
• Activity LED
This connector is designed to either plug directly into a backpanel or accept cables.

11.4.5 Pin descriptions

This section provides a pin-out of the SAS device and a description of the functions provided by the pins.
Table 16 SAS pin descriptions
P S
IN IGNAL NAME
S1 Port A Ground
S2* +Port A_in
S3* -Port A_in
S4 Port A Ground
S5* -Port A_out
S6* +Port A_out
S7 Port A Ground
S8 Port B Ground
S9* +Port B_in
S10* -Port B_in
S11 Port A Ground
S12* -Port B_out
S13* +Port B_out
S14 Port B Ground
* - Short pin to support hot plugging
NC - No connection in the drive.
S 10K.6 SAS P
AVVIO RODUCT
S
IGNAL TYPE
Diff. input pair
Diff output pair
Diff. input pair
Diff output pair
M , R . C
ANUAL EV
P S
IN IGNAL NAME
P1* NC (reserved 3.3Volts)
P2* NC (reserved 3.3Volts)
P3 NC (reserved 3.3Volts)
P4 Ground
P5 Ground
P6 Ground
P7 5 Volts charge
P8* 5 Volts
P9* 5 Volts
P10 Ground
P11* Ready LED
P12 Ground
P13 12 Volts charge
P14* 12 Volts
P15* 12 Volts
S
IGNAL TYPE
Open collector out
61