Seagate ST900MM0006 Product Manual page 56

Table 8 Supported commands
C
OMMAND NAME
Write and Verify (32)
Write Buffer (modes 0, 2, supported)
Write Buffer
Firmware Download option (modes 5, 7, Ah and Bh) [3]
Firmware Download option (modes 4, 5, 7)
Write Long (10)
Write Long (16)
Write Same (10) [5]
PBdata
LBdata
Write Same (16) [5]
Write Same (32)
XDRead
XDWrite
XPWrite
[1] Savvio drives can format to 512, 520, 524 or 528 bytes per logical block.
[2] Warning. Power loss during flash programming can result in firmware corruption. This usually makes the
drive inoperable.
[3] Reference Mode Sense command 1Ah for mode pages supported.
[4] Y = Yes. Command is supported.
N = No. Command is not supported.
A = Support is available on special request.
[5] Approximately 1.5 increase in time to complete this command for a SED drive versus a non-SED drive of
the same capacity.
S 10K.6 SAS P
AVVIO RODUCT
M , R . C
ANUAL EV
C S
OMMAND CODE UPPORTED
7Fh/000Ch N
3Bh Y (non-SED drives only)
3Bh
Y (non-SED drives only)
Y (SED drives only)
3Fh Y
9Fh/11h Y
41h Y
N
N
93h Y
7Fh/000Dh N
52h N
50h N
51h N
50