Microtek ScanMaker i800 Plus Supplement Manual page 22

8. Specify your scanning requirements in the Settings window.
9. Adjust image quality if necessary, using the Advanced Image Correction (AIC) tools.
10. If the colors in your film are faded and need restoring, check the "Automatic Color
11. Click the Scan (or "Batch") button in the Preview window to start scanning.
22 ScanMaker i800 Plus Supplement
c) You can save the selected negative
film settings into the Preset drop-
down menu for easy access in the
future.
For more details on how to control
settings for negative film scanning, see
the section "Negative Scan Settings
Window" in the ScanWizard Pro
Reference Manual in the Microtek CD-
ROM.
a) Select a desired image type.
b) Select a desired resolution.
c) Adjust the scan frame settings if necessary.
Restoration" box in the Settings window.
• If ScanWizard Pro was launched from an application program, the image is then
delivered to your application, where the image can be saved, printed, or edited.
Note: In Mac OS X, you will be prompted to specify the file attributes for the
scanned image before scanning takes place.
• If ScanWizard Pro was launched in stand-alone mode, you will be prompted to
specify the file attributes for the scanned image after the Scan or Batch
button is pressed, such as entering the file name, specifying a folder name of
your own, etc. When you have completed the settings, press the Done/Save
button, and the scanner will automatically scan and save your image based on
your settings.