Microtek ScanMaker i800 Plus Supplement Manual page 15

Pertains to how
your monitor
displays color,
relative to the RGB
Destination color
space
Color Matching
features
Improves the
contrast and
saturation of an
image
Immediately updates the Preview window image
when a new setting is selected. This will reflect
colors consistent with the newly selected profile
3. Go to the Preview window of ScanWizard Pro, and choose Reflective from the
4. Optional: If calibration has been
5. Click the Overview button to perform a preliminary scan of the image, which will
6. Select the Scan Frame tool from the Toolbar in the Preview window, and choose
7. Click the Prescan button to display a detailed image of area selected by the
• Next, you will be prompted to set up color matching for your scanner. If you
are not sure about what to do, simply click the OK button to accept the
settings. You can always change the settings at a later time.
For more information, see the Color Matching Setup section in the
ScanWizard Pro Reference Manual in the Microtek CD.
Scan Material menu.
performed, go to the Settings window
in ScanWizard Pro. Choose the profile
you have just created in the Input
Profile / Scanner Profile menu.
appear in the Preview window.
the area to be scanned by dragging a rectangle around it. You will see a flashing
frame (marquee) around the selected area.
Scan Frame tool. A thumbnail of the image appears as well in the Scan Job
Queue window.
ScanMaker i800 Plus Supplement 15