Energy Saving; Coffee Temperature; Beep; Default Values (Reset) - DeLonghi ESAM5600SL Owner's Manual

3. Press the icon to confirm;
4. Press the selection icons < or > until the required langua-
ge is displayed;
5. Press the icon to confirm;
The language is set. Press the p icon a number of items to exit
the menu.

Energy saving

Use this function to enable or disable energy saving mode.
When enabled, the function reduces energy consumption in
compliance with European regulations.
1. Choose the "SETTINGS" section as described above;
2. Press the selection icons < or > until "Energy saving" is
displayed;
3. Press the icon to confirm. "Disable?" is displayed (or
"Enable?" if the function has already been disabled).
4. Press the icon to disable or enable the function.
5. Press the p icon a number of times to exit the menu.
When the function is enabled, if the appliance is not used for
about 1 minute, "Energy Saving" is displayed.
Please note:
• A few seconds may elapse between " Energy Saving" mode
and delivery of the first drink. This is indicated by the rapid
increase then decrease of the progress bar and display of
the message "Preparation underway".
• When " Energy Saving" is disabled, the appliance turns the
cup warmer on automatically.

coffee temperature

To modify the temperature of the water used to make the cof-
fee, proceed as follows:
1. Choose the "SETTINGS" section as described above;
2. Press the < or > until "Coffee temperature" is displayed;
3. Press the icon to confirm.
4. Press the < or > icon until "Coffee temperature" is displa-
yed (l = low; llll = high);
5. Press the icon to confirm.
6. Press the p icon a number of times to exit the menu.
setting water hardness
For instructions on setting water hardness, see page 19.
setting display contrast
To increase or reduce the contrast of the display, proceed as
follows:
1. Choose the "SETTINGS" section as described above;
2. Press the selection icons < or > until "Display contrast" is
displayed;
3. Press the icon to confirm;
4. Press the selection icons < or > until the required display
contrast is reached. The progressive bar indicates the level
of contrast selected.
5. Then press the
the menu;
6. Press the p icon a number of times to exit the menu.

Beep

This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. The
beep is active by default.
1. Choose the "SETTINGS" section as described above;
2. Press the selection icons < or > until "Beep" is displayed;
3. Press the icon to confirm; "Disable?" is displayed (or
"Enable?" if the function is already disabled);
4. Press the icon to confirm and enable or disable the
function.
5. Press the p icon a number of times to exit the menu.

Default values (reset)

This resets all menu settings and programmed quantities back
to the default values (with the exception of the language
which remains as set).
1. Choose the "SETTINGS" section as described above;
2. Press the selection icons < or > until "Default Values" is
displayed;
3. Press the icon to confirm. "OK to confirm" is displa-
yed.
4. Press the icon to return to the original settings (or
the p icon to cancel the operation).
The appliance is automatically ready for use again with the
default settings.

Descaling

For instructions on descaling, see page 19.

statistics function

This displays statistics relating to the machine.
To display, proceed as follows:
1. Choose the "MAINTENANCE" section as described above.
2. Press the selection icons < or > until "Statistics" is displa-
yed.
3. Press the icon to confirm;
4. Press the selection icons < or > to verify:
- how many coffees have been made;
- how many drinks with milk have been made;
- how many times the machine has been descaled.
- the total number of litres of water delivered.
5. Press the icon to confirm or the p icon to exit the
menu.
12
icon to confirm or the p icon to exit