Carburetor Installation - Yamaha YZ125(R)/LC Owner's Service Manual

Table of Contents

CARBURETOR AND REED VALVE

9 Reed valve assembly 1

9 Reed valve spacer 2

Install the reed valve spacer with its wider con-

tact surface side a to the right.

9 Carburetor joint 1

9 Bolt (carburetor joint) 2

9 Throttle stop screw 1

9 Pilot air screw 3

Note the following installation points:

9 Screw in the pilot air screw until it is lightly

9 Back out it by the specified number of turns.

Pilot air screw:

*1-1/2 turns out

9 Starter plunger 1

10 Nm (1.0 m•kg, 7.2 ft•lb)