Cable Routing Diagram - Yamaha YZ125(R)/LC Owner's Service Manual

EC240000

CABLE ROUTING DIAGRAM

1 Brake hose
2 Cable guide
3 "ENGINE STOP" button lead
4 Fuel tank breather hose
5 Clamp
6 Throttle cable
7 Air vent hose (right)
8 Air vent hose (left)
9 Transmission oil breather hose
0 Overflow hose
q YPVS breather hose
w Radiator breather hose
e CDI magneto lead
r Wireharness
CABLE ROUTING DIAGRAM
A Pass the throttle cable and
"ENGINE STOP" button lead
into the cable guide. Align
with the cable guide the
front end of the tape on the
throttle cable.
B Pass the fuel tank breather
hose between the handlebar
and tension bar, then insert
its end into the hole of the
number plate.
C Pass the throttle cable and
"ENGINE STOP" button lead
over the radiator hose.
D Clamp the throttle cable,
"ENGINE STOP" button lead
and wireharness to the main
pipe. With the clamp ends
downward, tighten the throttle
cable to the extent that it
moves smoothly.
E Clamp the "ENGINE STOP"
button lead (where there is no
protector), wireharness and
throttle cable all together to the
main pipe with the clamp ends
downward.
2-13
SPEC
F Clamp the CDI magneto lead
on the upper part of
the frame gusset at its
protecting tube.
G Clamp the throttle cable and
wireharness to the main pipe.
With the clamp ends downward,
tighten the throttle cable to the
extent that it moves smoothly.
H Pass the air vent hose at
the rear of the throttle cable.
I Pass the transmission oil
breather hose, air vent hoses
and overflow hose between
the frame and connecting rod.
J Pass the radiator breather
hose and YPVS breather hose
outside the engine bracket
and inside the down tube. Then
pass the radiator breather
hose inside the YPVS
breather hose.
K Clamp the radiator breather
hose and CDI magneto lead
on the rear of the down-tube.