American Dynamics SpeedDome Ultra VIIE Operator's Manual Supplement page 11

VM16E/ADTT16E (Black Touch
Tracker)
Supported Protocol
Maximum Presets
2
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands.
(3) Requires firmware version 0701-2833-0103
(EEPROM) / 0701-2834-0201 (Flash PROM) or
newer.
VM32/AD32
Supported Protocol
Maximum Presets
2
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands.
VM96 1
Supported Protocol
Maximum Presets
3
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires software version 5.2 or newer.
(2) Preset information is stored at the host, not the
dome; therefore, divide 9,999 by the number of
domes to determine number of available Presets per
dome.
(3) Patterns are limited by time and the number of
available dome commands.
SPEEDDOME ULTRA VIIE DAY/NIGHT CAMERA DOME CONFIGURATION UTILITY
OPERATOR'S MANUAL SUPPLEMENT
SensorNet
1
RS-422
96 – SensorNet
4 – RS-422
16
3
Yes
3
1-16 or 1-64
SensorNet
1
RS-422
96 – SensorNet
4 – RS-422
16
Not supported
1-32
SensorNet
RS-422
2
9,999
16
Not supported
1-32
AD2150/AD2350
Supported Protocol
Maximum Presets
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Patterns are limited by time and the number of
available dome commands.
AD1650
Supported Protocol
Maximum Presets
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Patterns are limited by time and the number of
available dome commands.
(4) Requires additional equipment to achieve these
numbers. A dome address within each group of 64
or 99 cameras is reserved as a global broadcast
address.
AD168
Supported Protocol
Maximum Presets
Maximum Patterns
DirectSet Menu
Address Range
Notes:
(1) Requires the appropriate code control module.
(2) Requires the AD2083-02 series code converter.
(3) Presets information is stored at the converter or
control module, not the dome.
(4) Patterns are limited by time and the number of
available dome commands.
(5) Requires additional equipment to achieve these
numbers. A dome address within each group of 64
or 99 cameras is reserved as a global broadcast
address.
11 of 15
1
RS-422
2
16
3
16
Not supported
1-32
1
RS-422
2
16
3
16
Not supported
4
1-128
1 1 or 2
SensorNet RS-422
1, 2 1, 3
16 , 64
4
16
Not supported
SensorNet: 1-180
1, 5
RS-422: 1-99 or 1-180
8200-0184-12, REV. A
2, 5