Colour System (Av2 Or Av3 Mode); Colour Temperature; Colour System; Advanced - Sharp Aquos LC-15S5H Operation Manual

Basic Adjustment Settings (Continued)

COLOUR SYSTEM (AV2 or AV3 Mode)

Set the system to "AUTO" for normal reception. The "AUTO"
mode automatically detects the receiving signal system and
changes the reception system of the set. When the picture or
sound is not stable, switching to an appropriate system may
improve the picture or sound quality.
1
Press MENU to display the Menu screen.
2
Press \/| to select "PICTURE".
3
Press '/" to select "COLOUR SYSTEM", and press
ENTER.
4
Press '/"/\/| to select "AUTO", "PAL", "SECAM",
"N358", "N443" or "PAL60" and press ENTER.
5
Press MENU to exit.
NOTE
• "COLOUR SYSTEM" is available only in the AV2 and AV3 modes.
18

Colour Temperature

Adjust the colour temperature to give a better white balance.
1
Press MENU to display the Menu screen.
2
Press \/| to select "PICTURE".
3
Press '/" to select "ADVANCED", and press ENTER.
4
Press '/" to select "COLOUR TEMP.", and press
ENTER.
(Example: "USER" is selected)
5
Press '/" to select the desired item, and press
ENTER.
6
Press MENU to exit.
Selected item
USER Can set your desired color*
HIGH White with Bluish tone
MIDDLE
LOW White with Reddish tone
* When you select "USER", the following items are adjustable.
\ \ \ \ \ button
Selected item
RED Weaker red
GREEN Weaker green
BLUE Weaker blue
NOTE
• When resetting "RED", "GREEN" and "BLUE" to factory preset
values, perform the following procedure.
1 Press '/" to select "RESET" in the "ADVANCED" menu, and
press ENTER.
2 Press '/" to select "YES", and press ENTER.
Description
| | | | | button
Stronger red
Stronger green
Stronger blue