Channel Setting (Auto); Channel Setting (Manual) - Sharp Aquos LC-15S5H Operation Manual

Preset (Continued)

Channel Setting (AUTO)

1
Press MENU to display the Menu screen.
2
Press \/| to select "SETUP".
3
Press '/" to select "CH SETUP", and press ENTER.
4
Press '/" to select "AUTO", and press ENTER.
5
Press '/" to select "SOUND SYSTEM". Each time
you press \/|, the setting for individual items changes
as shown in the table on the right.
6
Press '/" to select "START SEARCH", and press
ENTER to begin the automatic programme search.
7
When the automatic programme search is completed,
the channel first received will be displayed.

Channel Setting (MANUAL)

1
Perform steps 1 to 3 in Channel Setting (AUTO).
2
Press '/" to select "MANUAL", and press ENTER.
3
Press '/" to select the desired adjustment item.
4
Each time you press \/|, the setting for individual
items changes as shown in the table on the right.
5
Press MENU to exit.
14
Selected item
POSITION The channel position changes to the upper or lower
number.
COLOUR SYSTEM The mode changes in the following order:
AUTO PAL
PAL60 N443
SOUND SYSTEM The mode changes in the following order:
B/G I D/K
SKIP The mode changes in the following order:
ON OFF
Channel numbers with a "G (RED)" mark on the left are
set to Skip.
To turn off Skip, press Channel Select to select the
desired channel, and then set the Skip mode on the CH
setup menu to "OFF".
FINE The frequency changes to allow fine tuning.
NICAM The broadcast sound system changes in the following
order:
ON (NICAM sound)
A2 Stereo system changes in the following order:
ON (A2 sound)
NOTE
• Switching Colour system:
Set the system to Auto for normal TV reception. The Auto mode
automatically detects the receiving signal system and changes the
reception system of the LCD TV set. When the picture or sound is
not stable, switching to an appropriate system may improve the
picture or sound quality.
• When using Fine tuning, the channel number changes from green
to yellow.
• To return the channel to its original frequency setting, follow the
manual channel preset procedure. (For details, see "Presetting the
Channels (MANUAL)" on page 13.)
Description
SECAM
N358
M
OFF (Monaural TV sound)
OFF (Monaural TV sound)