Basic Adjustment Settings; Picture Adjustments; Colour System (Only Av1 Or Av2 Mode) - Sharp Aquos LC-20B6M Operation Manual

Basic Adjustment Settings

Picture Adjustments

Adjust the picture to your preference with the following
picture settings.
1
Press MENU to display the Menu screen.
• The Picture Menu screen can be displayed directly by
pressing Red.
2
Press \/| to select "Picture".
3
Press '/" to select a specific adjustment item.
M e n u [ P i c t u r e ]
M e n u
P i c t u r e S o u n d S e t u p
C o n t r a s t C o n t r a s t [ [
B r i g h t n e s s B r i g h t n e s s [ [
C o l o u r C o l o u r [ [
T i n t i n t [ [
S h a r p n e s s S h a r p n e s s [ [
C o l o u r s y s t e m
A d v a n c e d
R e s e t
4
Press \/| to adjust the item to your desired position.
5
Press MENU to exit.
Selected item
Contrast* For less contrast
Brightness* For less brightness
Colour* For less colour
intensity
Tint* Skin tones become
purplish
Sharpness* For less sharpness
* These items cannot be adjusted when the PC mode is selected as
an input mode.
NOTE
• Select "Colour system" and press OK to select "Auto", "PAL",
"SECAM", "N358", "N443" or "PAL60". See right.
• Select "Advanced" and press OK to set "Colour temp.", "I/P Setup",
"DNR", "Film mode" or "Quick shoot". See pages 17 and 18.
• The items on the "Advanced" (except for the "Colour temp." menu)
cannot be set when the PC mode is selected as an input mode.
• When resetting all adjustment items (except for the items on the
"Colour system" and "Advanced" menu) to factory preset values,
perform the following procedure.
1 Press '/" to select "Reset", and press OK.
2 Press '/" to select "Yes", and press OK.
16
F e a t u r e s
5 5 0 ] ]
0 ] – +
0 ] – +
0 ] ]
0 ] – +
c c c c c button d d d d d button
For more contrast
For more brightness
For more colour
intensity
Skin tones become
greenish
For more sharpness

Colour System (Only AV1 or AV2 Mode)

Set the system to "Auto" for normal reception. The "Auto"
mode automatically detects the receiving signal system and
changes the reception system of the set. When the picture or
sound is not stable, switching to an appropriate system may
improve the picture or sound quality.
1
Perform steps 1 and 2 in Picture Adjustments to
display the Picture Menu screen.
2
Press '/" to select "Colour system", and press OK.
M e n u [ P i c t u r e : C o l o u r
M e n u
P i c t u r e S o u n d S e t u p F e a t u r e s
C o n t r a s t C o n t r a s t [ [ 5 5
0
B r i g h t n e s s B r i g h t n e s s [ [ 0
C o l o u r C o l o u r [ [ 0
T i n t i n t [ [ 0
S h a r p n e s s S h a r p n e s s [ [ 0
C o l o u r s y s t e m
A d v a n c e d
R e s e t
3
Press '/"/\/| to select "Auto", "PAL", "SECAM",
"N358", "N443" or "PAL60" and press OK.
M e n u [ P i c t u r e : C o l o u r
M e n u
S e l e c t e d d e s i r e d
A u t o P A L 6
P A L
S E C A M
N 3 5 8
N 4 4 3
4
Press MENU to exit.
NOTE
• "Colour system" is displayed only in the AV mode.
s y s t e m ]
] ]
] – +
] – +
] ]
] – +
s y s t e m ]
i t e m
0