Table of Contents
Advertisement
Basic operation
MAIN POWER
VOL
CH
MENU
TV/VIDEO
MAIN POWER
POWER/Standby
indicator
I Plug the headphone mini-plug into the HEADPHONE jack located on the front of the TV set.
NOTE
• Headphones are not included in the supplied accessories.
• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the HEADPHONE jack.
Turning the main power on and off
| Press the MAIN POWER switch. The POWER/
Standby indicator instantaneously changes
from red to green and the main unit is turned
on.
NOTE
• The On-screen indicator disappears after a few
seconds.
| To turn off the main power, press the MAIN
POWER switch.
ON/OFF Standby
To turn off the LCD TV
Press POWER. The POWER/Standby indicator will turn red.
To turn the LCD TV back on
Press POWER again. The POWER/Standby indicator will turn green.
Switching the TV/VIDEO (TV/AV1/AV2/AV3/COMPONENT) mode
1
Turn on the power of the connected video
equipment.
2
Press TV/VIDEO to select the applicable input
source.
The screen displays AV1, AV2, AV3,
COMPONENT or TV mode each time
TV/VIDEO is pressed.
NOTE
• The AV input mode indication remains for 6 seconds.
• AV1: Video equipment connected to the AV-IN1 input
terminals.
An S-video input terminal is additionally provided
for the AV-IN1 input. If both the S-video terminal
and normal video terminals are connected with
cables, the S-video input terminal takes priority.
• AV2: Video equipment connected to the AV-IN2 input
terminals.
• AV3: AV3 mode is used to adjust the preset settings
and IN3 or OUT can be selected. AV3 indication
is not displayed when OUT is selected.
(See page 19.)
• COMPONENT: Video equipment connected to the
COMPONENT input terminals.
Listening with headphones
Headphones
On-screen display
1 S 0 6
Headph.vol.30
0
R
Back
Please refer to page 17 to adjust the
sound volume.
TV mode
1 S 0 6
AV1 mode
A V 1
AV2 mode
A V 2
AV3 mode
A V 3
COMPONENT mode
C O M P O N E N T
End
M
11
Advertisement
Table of Contents
