Sharp LC-13SH1E Service Manual
Sharp LC-13SH1E Service Manual

Sharp LC-13SH1E Service Manual

Hide thumbs Also See for LC-13SH1E:

Advertisement

In the interests of user-safety (Required by safety regulations in some countries) the set should be re-
stored to its original condition and only parts identical to those specified should be used.
» IMPORTANT SERVICE SAFETY PRECAUTION ........................................................................................ 2
» SPECIFICATIONS ........................................................................................................................................4
» OPERATION MANUAL .................................................................................................................................5
» DIMENSIONS ...............................................................................................................................................7
» REMOVING OF MAJOR PARTS ..................................................................................................................8
» ADJUSTING PROCEDURE OF EACH SECTION ..................................................................................... 12
» TROUBLE SHOOTING TABLE ..................................................................................................................21
» CHASSIS LAYOUT .....................................................................................................................................26
» BLOCK DIAGRAM ......................................................................................................................................28
» OVERALL WIRING DIAGRAM ...................................................................................................................30
» DESCRIPTION OF SCHEMATIC DIAGRAM ............................................................................................. 32
» SCHEMATIC DIAGRAM .............................................................................................................................33
» PRINTED WIRING BOARD ASSEMBLIES ................................................................................................49
» REPLACEMENT PARTS LIST....................................................................................................................62
» PACKING OF THE SET ..............................................................................................................................75
1st Edition
SERVICE MANUAL
LCD COLOUR TELEVISION
MODELS
CONTENTS
SHARP CORPORATION
LC-13SH1E
LC-15SH1E
LC-13SH1E
LC-15SH1E
Page

Advertisement

Table of Contents
loading

Summary of Contents for Sharp LC-13SH1E

  • Page 1: Table Of Contents

    LC-13SH1E LC-15SH1E 1st Edition SERVICE MANUAL LCD COLOUR TELEVISION LC-13SH1E LC-15SH1E MODELS In the interests of user-safety (Required by safety regulations in some countries) the set should be re- stored to its original condition and only parts identical to those specified should be used.
  • Page 2: Important Service Safety Precaution

    LC-13SH1E LC-15SH1E IMPORTANT SERVICE SAFETY PRECAUTION Ë Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: • Connect the resistor connection to all exposed metal...
  • Page 3 LC-13SH1E LC-15SH1E Precautions for using lead-free solder 1 Employing lead-free solder "MAIN PWB" of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.
  • Page 4: Specifications

    4.1 kg, w/o accessories As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be...
  • Page 7: Dimensions

    LC-13SH1E LC-15SH1E DIMENSIONS ËLC-13SH1E/LC-15SH1E Unit: mm 143/145 153/155 196/205 267/307 277/281 341/384 115/115 79/79 157/158...
  • Page 8: Removing Of Major Parts

    LC-13SH1E LC-15SH1E REMOVING OF MAJOR PARTS 1. Remove the stand fixing screws (4 pcs.). 2. Remove the cabinet B fixing screws (6 pcs.). 3. Remove the cabinet B after opening from the direction of an arrow. 4. Detach the connector from each PWB.
  • Page 9 LC-13SH1E LC-15SH1E 5. Remove the 2 lock screws from the main PWB and undo the hooks a. Detach the chassis frame, together with its terminals, from the main PWB. 6. Remove the 2 lock screws from the sub PWB and undo the hooks b, c and d. Detach the chassis frame together with its terminals, from the sub PWB.
  • Page 10 LC-13SH1E LC-15SH1E » Precautions in handling the LCD panels 1. Work in a clean room (with humidities below 50%). 2. Be sure to wear an anti-static armband. 3. Handle the panels on an electro-conductive mat. 4. Be careful not to fall, shake and shock the panels.
  • Page 11 LC-13SH1E LC-15SH1E » Precautions at the time of the side B(back) service of main and sub unit. 1. Remove only SC1203 of the FFC for connection between Main unit (SC1203) and LCD panel, and connect the extended cable (QCNW-A553WJZZ) for service.
  • Page 12: Adjusting Procedure Of Each Section

    LC-13SH1E LC-15SH1E ADJUSTING PROCEDURE OF EACH SECTION The best adjustment is made before shipping. If any position deviation is found or after part replacement is performed, adjust as follows. Preparation for adjustments Use a stable AC power source. LC-13/15SH1E AC Power : 230V 1.
  • Page 13 LC-13SH1E LC-15SH1E 5. Adjustment 5-1. RF AGC adjustment 1) Feed the colour bar signal. 2) In Adjustment Mode, select the RF AGC AUTO ("OFF") and press the " RIGHT" cursor key to start the adjustment. 3) Automatic adjustment is complete when it display "OK" is displayed.
  • Page 14 LC-13SH1E LC-15SH1E 7. Lamp error detection 7-1. Functional description This LCD colour television has a function (lamp error detection) to be turned OFF automatically for safety when the lamp or lamp circuit is abnormal. If the lamp or lamp circuit is abnormal, or some other errors happen, and the lamp error detection is executed, the followings occur.
  • Page 15: Hotel Mode

    LC-13SH1E LC-15SH1E 8. Hotel mode 8-1. How to enter the Hotel mode. 1) Turn on the power and enter the Adjustment Process mode. 2) Using the "UP" or "DOWN" cursor key on the remote controller, select the Hotel mode. 3) Using the "RIGHT" cursor key on the remote controller, change the setting from "0" to "1". Now the Hotel mode shows up.
  • Page 16 LC-13SH1E LC-15SH1E 9. Software Loading 1) Upgrading the software or after replacement of IC151, IC501 or Main PWB, make sure to upload the processors with updated software. 2) Please use the dedicated Interface JIG (JIGINF-001) and supplied programs for upgrading the software.
  • Page 17 LC-13SH1E LC-15SH1E 4) First click [SST / ATMEL] and then follow by [Identify] to identify the flash memory. Confirm the item below in Comment Window. 5) Click [Select Intel HEX File …] to open the source files. The source file name are "Sedna_Sharp****.hex"...
  • Page 18 LC-13SH1E LC-15SH1E 9) Finally click [Restart System] to initialize. Confirm "Reset done" in Comment Window. 10) Power OFF the set by unplugging AC Cord, remove the JIG from the plug and wait for 1 minute before power ON again. Notes: If any error occur during any process, power OFF the set and repeat the all the process again. If these still fail, please erase Main Software and repeat the whole process again.
  • Page 19 LC-13SH1E LC-15SH1E 4) First click [Enter ISP Mode] then click [Send]. If the following window appear, click [Yes] Confirm ISP status "Ready". If "Entering ISP is not successful" occur, repeat step No. 4) again. If still fail, unplug the AC cord and repeat from step No.
  • Page 20 LC-13SH1E LC-15SH1E 6) Next click [Write Flash] and load the source file by clicking [Browse]. The source file name are "LC20SH1_****.hex". Once the data is loaded successfully click [Send]. Confirm the Program, PK26 & Character are all "OK" and ISP status is "Ready".
  • Page 21: Trouble Shooting Table

    LC-13SH1E LC-15SH1E TROUBLE SHOOTING TABLE...
  • Page 22 LC-13SH1E LC-15SH1E TROUBLE SHOOTING TABLE (Continued)
  • Page 23 LC-13SH1E LC-15SH1E TROUBLE SHOOTING TABLE (Continued)
  • Page 24 LC-13SH1E LC-15SH1E TROUBLE SHOOTING TABLE (Continued)
  • Page 25 LC-13SH1E LC-15SH1E TROUBLE SHOOTING TABLE (Continued)
  • Page 26: Chassis Layout

    LC-13SH1E LC-15SH1E CHASSIS LAYOUT OPERATION Unit POWER INPUT MENU DOWN S4201 DOWN SC4201 SW4204 SW4207 SW4206 SW4202 SW4203 SW4205 SUB Unit MAIN Unit SC1202 SC1201 SC105 IC7705 Q7711 IC751 T1.6A L 250V F6700 IC1201 IC1101 IC704 IC701 IC101 P2002 IC151...
  • Page 27: Block Diagram

    LC-13SH1E LC-15SH1E BLOCK DIAGRAM R_IN / L_IN SP_L/R (-) ANTENNA TUNER SF201 AUDIO POWER AMP SPEAKER P3301 SP_L/R (+) IC3301 SF202 SCART SC3901 (AV1) Y/U/V HEADPHONE J3701 JACK IC801 SC_ RIN / SC_LIN Y/U/V IN AUDIO IN SC_ ROUT / SC_LOUT...
  • Page 28: Overall Wiring Diagram

    LC-13SH1E LC-15SH1E OVERALL WIRING DIAGRAM LCD GRADUATION LCD SOURCE LCD GATE ( QCNW-D229WJQZ ) ( QCNW-D228WJQZ ) ( QCNW-D230WJQZ ) ( QCNW-D362WJQZ ) P6700 NA390WJ SC105 N0596RE SC4201 N0596RE 3.3Vsbt 3.3Vstb POWER POWER KEY1 KEY1 DUNTKC858WE KEY2 KEY2 ( QPWBFC858WJ)
  • Page 29: Description Of Schematic Diagram

    LC-13SH1E LC-15SH1E DESCRIPTION OF SCHEMATIC DIAGRAM VOLTAGE MEASUREMENT CONDITION: 1. The voltages at test points are measured on the stable supply voltage of AC 220–240V. Signals are fed by a color bar signal generator for servicing purpose and the above voltages are measured with a 20k ohm/V tester.
  • Page 30: Schematic Diagram

    LC-13SH1E LC-15SH1E SCHEMATIC DIAGRAM Ë OPERATION Unit...
  • Page 31 LC-13SH1E LC-15SH1E Ë SUB Unit-1/3...
  • Page 32 LC-13SH1E LC-15SH1E Ë SUB Unit-2/3 (LC-13SH1E)
  • Page 33 LC-13SH1E LC-15SH1E Ë SUB Unit-2/3 (LC-15SH1E)
  • Page 34 LC-13SH1E LC-15SH1E Ë SUB Unit-3/3...
  • Page 35 LC-13SH1E LC-15SH1E Ë MAIN Unit-1/3...
  • Page 36 LC-13SH1E LC-15SH1E Ë MAIN Unit-2/3...
  • Page 37 LC-13SH1E LC-15SH1E Ë MAIN Unit-3/3...
  • Page 38 LC-13SH1E LC-15SH1E Ë R/C, LED Unit...
  • Page 39: Printed Wiring Board Assemblies

    LC-13SH1E LC-15SH1E PRINTED WIRING BOARD ASSEMBLIES OPERATION Unit (Wiring Side) OPERATION Unit (Chip Parts Side) R/C, LED Unit (Wiring Side) R/C, LED Unit (Chip Parts Side)
  • Page 40 LC-13SH1E LC-15SH1E MAIN Unit (Side-A)
  • Page 41 LC-13SH1E LC-15SH1E MAIN Unit (Chip Parts Side-A)
  • Page 42 LC-13SH1E LC-15SH1E MAIN Unit (Side-B)
  • Page 43 LC-13SH1E LC-15SH1E MAIN Unit (Chip Parts Side-B)
  • Page 44 LC-13SH1E LC-15SH1E SUB Unit (Wiring Side)
  • Page 45 LC-13SH1E LC-15SH1E SUB Unit (Chip Parts Side)
  • Page 46: Parts List

    Part No. Description Code Ref. No. Part No. Description Code PARTS LIST DUNTKC857WE06 (LC-13SH1E) DUNTKC857WE05 (LC-15SH1E) PARTS REPLACEMENT SUB UNIT INTEGRATED CIRCUITS Replacement parts which have these special safety characteristics IC3301 VHiAN17821A-1 J AN17821A identified in this manual; electrical components having such features IC7701 VHiSTRW67652E J I.C.
  • Page 47 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC857WE06 (LC-13SH1E) C3908 VCCCCY1HH101JY J 100p Ceramic DUNTKC857WE05 (LC-15SH1E) C3909 VCCCCY1HH331JY J 330p Ceramic C3910 VCEAEA1CW106M+ J 10 Electrolytic SUB UNIT (Continued) C3911 VCEAEA1CW106M+ J 10...
  • Page 48 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC857WE06 (LC-13SH1E) R6714 VRD-RA2EE821JY J 820 1/4W Carbon DUNTKC857WE05 (LC-15SH1E) R6715 VRD-RA2EE821JY J 820 1/4W Carbon R6716 VRS-CY1JF103JY J 10k 1/16W Metal Oxide SUB UNIT (Continued)
  • Page 49 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC857WE06 (LC-13SH1E) DUNTKC858WE06 (LC-13SH1E) DUNTKC857WE05 (LC-15SH1E) DUNTKC858WE05 (LC-15SH1E) SUB UNIT (Continued) OPERATION UNIT DIODES P6703 QPLGNA390WJZZ Plug, 2-pin P7701 QCNCMA012WJZZ J Connector, 15-pin D4201 RH-EX0646GEZZY J Zener Diode...
  • Page 50 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC859WE06 (LC-13SH1E) DUNTKC860WE05 (LC-13SH1E) DUNTKC859WE05 (LC-15SH1E) DUNTKC860WE04 (LC-15SH1E) R/C, LED UNIT MAIN UNIT TRANSISTORS TUNER NOTE: THE PARTS HERE SHOWN ARE SUPPLIED AS AN Q4001 VSKRC104S//-1Y J KRC104S ASSEMBLY BUT NOT INDEPENDENTLY.
  • Page 51 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC860WE05 (LC-13SH1E) C414 VCKYCY1HB103KY J 0.01 Ceramic DUNTKC860WE04 (LC-15SH1E) C415 VCKYCY1EF104ZY J 0.1 Ceramic C416 VCKYCY1EF104ZY J 0.1 Ceramic MAIN UNIT C417 VCKYCY1EF104ZY J 0.1 Ceramic...
  • Page 52 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC860WE05 (LC-13SH1E) R111 VRS-CY1JF103JY J 10k 1/16W Metal Oxide DUNTKC860WE04 (LC-15SH1E) R113 VRS-CY1JF103JY J 10k 1/16W Metal Oxide R114 VRS-CY1JF2R2JY J 2.2 1/16W Metal Oxide MAIN UNIT (Continued)
  • Page 53 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC860WE05 (LC-13SH1E) R833 VRS-CY1JF121JY J 120 1/16W Metal Oxide DUNTKC860WE04 (LC-15SH1E) R834 VRS-CY1JF750JY J 75 1/16W Metal Oxide R835 VRS-CY1JF750JY J 75 1/16W Metal Oxide MAIN UNIT (Continued)
  • Page 54 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC860WE05 (LC-13SH1E) DUNTKC860WE04 (LC-15SH1E) MAIN UNIT (Continued) FB532 RBLN-0062TAZZY J Ferrite Bead FB533 RBLN-0062TAZZY J Ferrite Bead FB535 RBLN-0062TAZZY J Ferrite Bead FB801 RBLN-0062TAZZY J Ferrite Bead...
  • Page 55 Connecting Cord QCNW-D362WJQZ Connecting Cord QCNW-D363WJQZ Connecting Cord QEARPA132WJFW Grounding Part, x1 TLABMB319WJZZ Model Label (LC-13SH1E/E(F)/E(K)/E(R)) TLABMB475WJZZ Model Label(LC-13SH1E(I)) TLABNB105WJZZ EICTA Label Not Available – Serial No. Label — VSP7530PB678B J Speaker, x2 XEBS930P14000 J Screw, x5 XHBS830P10000 S Screw, x1...
  • Page 56 LC-13SH1E LC-15SH1E CABINET AND MECHANICAL PARTS Oniy for LC-15SH1E Operation PWB Oniy for LC-13SH1E R/C, LED PWB 5-2-5 5-2-3 5-2-1 5-2-4 5-2-2 3-1-3 3-1-1 3-1-2 Sub PWB Main PWB...
  • Page 57 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code CABINET AND MECHANICAL PARTS TLABSA029WJZZ J GOST Label (LC-15SH1E(R)) (LC-15SH1E) RCORFA032WJZZ J Ferrite Core RCORF0103CEZZ J Ferrite Core PSPAZA677WJZZ Spacer, x1 CCABAA754WJ01 Cabinet A Ass’y LHLDW1033CEKZ...
  • Page 58: Operation Manual

    PACKING PARTS SUPPLIED ACCESSORIES (NOT REPLACEMENT ITEM) å QACCBA016WJPZ J AC Cord (LC-15SH1E(K)) SPAKCB717WJZZ – Packing Case(LC-15SH1E) — å QACCBA024WJPZ J AC Cord (LC-13SH1E(K)) SPAKCB718WJZZ – Packing Case(LC-13SH1E) — å QACCKA006WJPZ J AC Cord (LC-15SH1E/E SPAKPA465WJZZ – Wrapping Paper — (F)/E(I)/E(R)) (LC-15SH1E) å...
  • Page 59: Schematic Diagram

    Part No. Description Code Ref. No. Part No. Description Code PARTS LIST DUNTKC857WE06 (LC-13SH1E) DUNTKC857WE05 (LC-15SH1E) PARTS REPLACEMENT SUB UNIT INTEGRATED CIRCUITS Replacement parts which have these special safety characteristics IC3301 VHiAN17821A-1 J AN17821A identified in this manual; electrical components having such features IC7701 VHiSTRW67652E J I.C.
  • Page 60 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC857WE06 (LC-13SH1E) C3908 VCCCCY1HH101JY J 100p Ceramic DUNTKC857WE05 (LC-15SH1E) C3909 VCCCCY1HH331JY J 330p Ceramic C3910 VCEAEA1CW106M+ J 10 Electrolytic SUB UNIT (Continued) C3911 VCEAEA1CW106M+ J 10...
  • Page 61 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC857WE06 (LC-13SH1E) R6714 VRD-RA2EE821JY J 820 1/4W Carbon DUNTKC857WE05 (LC-15SH1E) R6715 VRD-RA2EE821JY J 820 1/4W Carbon R6716 VRS-CY1JF103JY J 10k 1/16W Metal Oxide SUB UNIT (Continued)
  • Page 62 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC857WE06 (LC-13SH1E) DUNTKC858WE06 (LC-13SH1E) DUNTKC857WE05 (LC-15SH1E) DUNTKC858WE05 (LC-15SH1E) SUB UNIT (Continued) OPERATION UNIT DIODES P6703 QPLGNA390WJZZ Plug, 2-pin P7701 QCNCMA012WJZZ J Connector, 15-pin D4201 RH-EX0646GEZZY J Zener Diode...
  • Page 63 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC859WE06 (LC-13SH1E) DUNTKC860WE05 (LC-13SH1E) DUNTKC859WE05 (LC-15SH1E) DUNTKC860WE04 (LC-15SH1E) R/C, LED UNIT MAIN UNIT TRANSISTORS TUNER NOTE: THE PARTS HERE SHOWN ARE SUPPLIED AS AN Q4001 VSKRC104S//-1Y J KRC104S ASSEMBLY BUT NOT INDEPENDENTLY.
  • Page 64 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC860WE05 (LC-13SH1E) C414 VCKYCY1HB103KY J 0.01 Ceramic DUNTKC860WE04 (LC-15SH1E) C415 VCKYCY1EF104ZY J 0.1 Ceramic C416 VCKYCY1EF104ZY J 0.1 Ceramic MAIN UNIT C417 VCKYCY1EF104ZY J 0.1 Ceramic...
  • Page 65 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC860WE05 (LC-13SH1E) R111 VRS-CY1JF103JY J 10k 1/16W Metal Oxide DUNTKC860WE04 (LC-15SH1E) R113 VRS-CY1JF103JY J 10k 1/16W Metal Oxide R114 VRS-CY1JF2R2JY J 2.2 1/16W Metal Oxide MAIN UNIT (Continued)
  • Page 66 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC860WE05 (LC-13SH1E) R833 VRS-CY1JF121JY J 120 1/16W Metal Oxide DUNTKC860WE04 (LC-15SH1E) R834 VRS-CY1JF750JY J 75 1/16W Metal Oxide R835 VRS-CY1JF750JY J 75 1/16W Metal Oxide MAIN UNIT (Continued)
  • Page 67 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC860WE05 (LC-13SH1E) DUNTKC860WE04 (LC-15SH1E) MAIN UNIT (Continued) FB532 RBLN-0062TAZZY J Ferrite Bead FB533 RBLN-0062TAZZY J Ferrite Bead FB535 RBLN-0062TAZZY J Ferrite Bead FB801 RBLN-0062TAZZY J Ferrite Bead...
  • Page 68 Connecting Cord QCNW-D362WJQZ Connecting Cord QCNW-D363WJQZ Connecting Cord QEARPA132WJFW Grounding Part, x1 TLABMB319WJZZ Model Label (LC-13SH1E/E(F)/E(K)/E(R)) TLABMB475WJZZ Model Label(LC-13SH1E(I)) TLABNB105WJZZ EICTA Label Not Available – Serial No. Label — VSP7530PB678B J Speaker, x2 XEBS930P14000 J Screw, x5 XHBS830P10000 S Screw, x1...
  • Page 69 LC-13SH1E LC-15SH1E CABINET AND MECHANICAL PARTS Oniy for LC-15SH1E Operation PWB Oniy for LC-13SH1E R/C, LED PWB 5-2-5 5-2-3 5-2-1 5-2-4 5-2-2 3-1-3 3-1-1 3-1-2 Sub PWB Main PWB...
  • Page 70 LC-13SH1E LC-15SH1E Ref. No. Part No. Description Code Ref. No. Part No. Description Code CABINET AND MECHANICAL PARTS TLABSA029WJZZ J GOST Label (LC-15SH1E(R)) (LC-15SH1E) RCORFA032WJZZ J Ferrite Core RCORF0103CEZZ J Ferrite Core PSPAZA677WJZZ Spacer, x1 CCABAA754WJ01 Cabinet A Ass’y LHLDW1033CEKZ...
  • Page 71: Packing Parts

    PACKING PARTS SUPPLIED ACCESSORIES (NOT REPLACEMENT ITEM) å QACCBA016WJPZ J AC Cord (LC-15SH1E(K)) SPAKCB717WJZZ – Packing Case(LC-15SH1E) — å QACCBA024WJPZ J AC Cord (LC-13SH1E(K)) SPAKCB718WJZZ – Packing Case(LC-13SH1E) — å QACCKA006WJPZ J AC Cord (LC-15SH1E/E SPAKPA465WJZZ – Wrapping Paper — (F)/E(I)/E(R)) (LC-15SH1E) å...
  • Page 72: Packing Of The Set

    LC-13SH1E LC-15SH1E PACKING OF THE SET Only for LC-13/15SH1E/E(F) X3, X6, X7, X8 Only for LC-13/15SH1E...
  • Page 73 LC-13SH1E LC-15SH1E COPYRIGHT © 2004 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Lc-15sh1e

Table of Contents