Backlight; Picture Adjustments; Contrast; Brightness - Sharp Aquos LC-15S5H Operation Manual

BACKLIGHT

You can adjust the brightness of the picture.
Directly setting the BACKLIGHT
1
Press BACKLIGHT to display the BACKLIGHT screen.
2
Press BACKLIGHT to change the setting.
OPC OFF
BACKLIGHT [BRIGHT]
OPC ON OPC OFF
BACKLIGHT [AUTO] BACKLIGHT [USER]
NOTE
• [BRIGHT]: Maximum brightness
[NORMAL]: Suitable for viewing in a well-lit area. Saves energy.
[DARK]: Sufficiently bright when viewing in dim areas.
[USER]: The brightness can be adjusted to suit your
preference using \/|.
[AUTO]: Screen brightness adjusts according to the ambient
light of the room to conserve power consumption.
The OPC indicator lights up green.
• When set to "AUTO", make sure no object obstructs the OPC
sensor, which could affect its ability to sense surrounding light.
Setting on the Menu screen
1
Press MENU to display the Menu screen.
2
Press \/| to select "PICTURE".
3
Press '/" to select "BACKLIGHT".
4
Press \/| to adjust the item to the desired position.
5
Press MENU to exit.
NOTE
• "BACKLIGHT" cannot be adjusted while "OPC" is set to "ON".
Basic Adjustment Settings (Continued)
OPC OFF
BACKLIGHT [NORMAL]
OPC OFF
BACKLIGHT [DARK]

Picture Adjustments

Adjust the picture to your preference with the following
picture settings.
1
Press MENU to display the Menu screen.
2
Press \/| to select "PICTURE".
3
Press '/" to select a specific adjustment item.
4
Press \/| to adjust the item to your desired position.
5
Press MENU to exit.
\ \ \ \ \ button
Selected item

BACKLIGHT

The screen dims

CONTRAST

For less contrast

BRIGHTNESS

For less brightness

COLOUR

For less colour
intensity

TINT

Skin tones become
purplish

SHARPNESS

For less sharpness
NOTE
• Select "COLOUR SYSTEM" and press ENTER to select "AUTO",
"PAL", "SECAM", "N358", "N443" or "PAL60". See page 18.
• Select "ADVANCED" and press ENTER to set "COLOUR TEMP.".
See page 18.
• When resetting all adjustment items (except for the items on the
"AV MODE", "OPC", "COLOUR SYSTEM" and "ADVANCED"
menu) to factory preset values, perform the following procedure.
1 Press '/" to select "RESET", and press ENTER.
2 Press '/" to select "YES", and press ENTER.
| | | | | button
The screen brightens
For more contrast
For more brightness
For more colour
intensity
Skin tones become
greenish
For more sharpness
17