System Connections; Speaker Connection - Sharp XL-UH06H Operation Manual

System connections

Precautions
■
Please ensure that the equipment is positioned in a
●
well ventilated area and ensure that there is at least
10 cm (4") of free space along the sides, top and back
of the equipment.
10 cm (4") 10 cm (4")
Use the unit on a firm, level surface free from
●
vibration.
Place the speakers at least 30 cm (12") away from any
●
CRT TV to avoid colour variations across the TV screen.
If the variations persist, move the speakers further away
from the TV. LCD TV is not prone to such variation.
Keep the unit away from direct sunlight, strong magnetic
●
fields, excessive dust, humidity and electronic/electrical
equipment (home computers, facsimiles, etc.) which
generate electrical noise.
Do not place anything on top of the unit.
●
Do not expose the unit to moisture, to temperatures
●
higher than 60°C (140°F) or to extremely low
temperatures.
If your system does not work properly, disconnect the
●
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
In case of an electrical storm, unplug the unit for
●
safety.
Hold the AC power plug by the head when removing it
●
from the wall socket, as pulling the lead can damage
internal wires.
The AC power plug is used as a disconnect device
●
and shall always remain readily operable.
Do not remove the outer cover, as this may result
●
in electric shock. Refer internal service to your
local SHARP service facility.
10 cm (4")
10 cm (4")
E-2
The ventilation should not be impeded by covering the
●
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
No naked flame sources, such as lighted candles,
●
should be placed on the apparatus.
Attention should be drawn to the environmental
●
aspects of battery disposal.
This unit should only be used within the range of 5°C
●
- 35°C (41°F - 95°F).
The apparatus is designed for use in moderate
●
climates.

Speaker connection

■
Fully insert the speaker wires into the speaker
●
terminals.
Use speakers with an impedance of 4 ohms or more,
●
as lower impedance speakers can damage the unit.
Do not make a mistake when connecting the right and
●
left speakers. The right speaker is the one on the right
side when you face the unit.
Do not allow any objects to fall into or to be placed in
●
the bass reflex ducts.
Do not stand or sit on the speakers. You may be
●
injured.