Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice.
The performance specification figures indicated are
nominal values of production units. There may be some
deviations from these values in individual units.
General
■
Power source
Power consumption
Dimensions
Weight
(*) This power consumption value is obtained when the
main unit is in stand-by mode.
Amplifier
■
Output
MPO: 6 W (3 W + 3 W) (10% T.H.D.)
RMS: 5 W (2.5 W + 2.5 W) (10% T.H.D.)
power
RMS: 4 W (2 W + 2 W) (1% T.H.D.)
Output
Speakers: 4 ohms
terminals
CD player
■
Type
Single disc multi-play compact
disc player
Signal readout
Non-contact, 3-beam
semiconductor laser pickup
D/A converter
Multi bit D/A converter
Frequency
20 - 20,000 Hz
response
Dynamic range
90 dB (1 kHz)
AC 220 - 240 V ~ 50/60 Hz
Power on: 10 W
Power stand-by: 0.4 W (*)
Width: 190 mm (7 - 1/2")
Height: 115.7 mm (4 - 9/16")
Depth: 235 mm (9 - 1/4")
1.48 kg (3.26 lbs.)
USB
■
USB host
interface
Support file
Bitrate support
Other
File system
support
Tuner
■
Frequency range
Speaker
■
Type
Maximum input
power
Rated input power 2.5 W
Impedance
Dimensions
Weight
E-13
Complies with USB 1.1 (Full
●
Speed)/2.0 Mass Storage Class.
Support Bulk only and CBI
●
protocol.
MPEG 1 Layer 3
●
WMA (Non DRM)
●
MP3 (32 ~ 320 kbps)
●
WMA (64 ~ 160 kbps)
●
Maximum total number of MP3/
●
WMA files is 999.
Maximum
total
number
●
folders is 99 INCLUSIVE of root
directory.
Support
USB
devices
●
Microsoft
Windows/DOS/FAT
16/FAT 32.
2 kbyte block length for sector.
●
FM: 87.5 - 108 MHz
1-way type speaker system
8 cm (3") Full range
5 W
4 ohms
Width: 111 mm (4 - 3/8")
Height: 194 mm (7 - 5/8")
Depth: 127.5 mm (5 - 1/64")
0.86 kg (1.90 lbs.)/each
of
with