Table of Contents
Advertisement
11/05/07 10:18:22 32KVCC00_126
4.
After cleaning, rinse the motorcycle
thoroughly with plenty of clean water.
Strong detergent residue can corrode
alloy parts.
5.
Dry the motorcycle, start the engine, and
let it run for several minutes.
6.
Test the brakes before riding the
motorcycle. Several applications may be
necessary to restore normal braking
performance.
7.
Lubricate the drive chain immediately
after washing and drying the motorcycle.
Braking efficiency may be temporarily
impaired immediately after washing the
motorcycle.
Anticipate longer stopping distance to avoid
a possible accident.
116
Finishing Touches
After washing your motorcycle, consider
using a comme r cia lly-a v a ilable spr a y
cleaner/polish or quality liquid or paste wax
to finish the job. Use only a non-abrasive
polish or wax made specifically for
motorcycles or automobiles. Apply the
polish or wax according to the instructions
on the container.
Removing Road Salt
Road Salt used on roads during winter and
salt from seawater causes rust.
Wash your motorcycle as follows after it
has run through salty water or on roads
treated with Road Salt.
1.
Clean the motorcycle using cool water
(page
115
).
Do not use warm water.
This worsens the effect of the salt.
2.
Dry the motorcycle and make sure the
metal is protected with the wax.
Hide quick links:
Advertisement
Table of Contents
