Honda GLH125 SH Owner's Manual page 103

11/05/07 10:14:46 32KVCC00_103
WHEEL REMOVAL
Refer to the Safety Precautions on page
Front Wheel Removal
(Type ) II
1. Place the motorcycle on its center stand.
2. Raise the front wheel off the ground by
placing a support block under the engine.
3. Remove the speedometer cable ( ) by
removing the screw ( ).
4. Remove the front axle nut cap ( ).
5. Remove the front axle nut ( ).
6. Remove the front axle shaft ( ), front
wheel and side collar.
Do not depress the brake lever when the
wheel is off the motorcycle. The caliper
pistons will be forced out of the cylinders
with subsequent loss of brake fluid. If this
occurs, servicing of the brake system will be
necessary. See your dealer for this service.
65 .
1
2
3
4
5
(5)
(1) Speedometer cable
(2) Screw
(3) Front axle nut cap
(1)
(3) (4) (2)
(4) Front axle nut
(5) Front axle shaft
93