Honda GLH125 SH Owner's Manual page 114

11/05/07 10:16:30 32KVCC00_114
Fuse Holder:
The fuse holders ( ) are located behind the 1
left side cover.
The specified fuses are:
10A, 15A
1. Remove the left side cover (page
2. Remove the fuse holder from the fuse
holder cover ( ). 2
3. Open the fuse holder and lift out the old
fuse ( ) with the clips ( ). 3
4. Slide the old fuse out of the clips and
discard it.
5. Slide the clips onto the ends of the spare
fuse ( ), push them back into the fuse 5
holder, and close the fuse holder.
The spare fuse is attached to the fuse
holder cover.
6. Close the fuse holder and install it in the
fuse holder cover.
7. Install the left side cover.
Do not pry the clips open to get a fuse out;
you could bend them and cause poor
contact with the new fuse. A loose fuse
could cause damage to the electrical system
and even start a fire.
104
48 ).
4
(1) Fuse holders
(2) Fuse holder cover
(3) Old fuse
(4) Clips
(5) Spare fuse
(4)
(1)
(3)
(4)
(5)
(2)