HP R1500 - UPS XR User Manual page 45

The email messages sent by the UPS Network Module are compatible with mobile transfer telephone systems
using the SMS standard for text messaging. The required format might vary, depending on the cellular
service provider. Contact your cellular service provider for mail to SMS gateway settings.
Up to four recipients can be configured to receive email notifications from the UPS Network Module. To
configure a recipient of email notifications:
Enter the email address of the recipient in the Recipient field.
1.
Select the appropriate checkboxes to add log file attachments to the email notifications for the recipient.
2.
The selected log files are included in .csv format.
To send periodic email reports with log file attachments to the recipient:
3.
Enter the interval in days between email report transmissions.
a.
Select the time of the day when email reports are generated and transmitted from the pull-down
b.
menu.
Select the date of the month the next email report should be generated and transmitted.
c.
After this date, the screen indicates the date and time of the next transmission. Log files are included
in .csv format.
Select the checkbox for each event that should trigger an email notification to the recipient. To save the
4.
notified event configuration to the default selections, click Set Default. The default selections are:
UPS Off sequence in progress
o
UPS alarms
o
Click Save.
5.
Click Test to send a test email notification to the recipient.
6.
To disable a recipient email address:
Select the address for the recipient you want to disable.
1.
HP UPS Network Module web interface 45