HP R1500 - UPS XR User Manual page 43

To add a trap receiver:
Click Add Trap Receiver.
1.
Configure the settings for the new application on the Trap Receivers Settings screen (on page 44).
2.
To modify a trap receiver:
Select the checkbox for the application you want to modify. To select all applications, click All.
1.
Click Modify Trap Receiver.
2.
Modify the settings for the application on the Trap Receivers Settings screen (on page 44).
3.
To remove a trap receiver:
Select the checkbox for the application you want to remove. To select all applications, click All.
1.
Click Remove.
2.
To simulate a utility power failure:
Select the checkbox for the application you want to test. To select all applications, click All.
1.
Click Utility Failure Test. The UPS Network Module sends a Utility failure trap, and then sends a Utility
2.
restored trap 30 seconds later.
Verify that the selected application received the traps over the network.
3.
To simulate a UPS On Battery condition:
Select the checkbox for the application you want to test. To select all applications, click All.
1.
Click Shutdown Test.
2.
The selected application processes the simultaneous alarms and performs an actual shutdown
3.
sequence.
CAUTION: The Shutdown Test generates an actual shutdown sequence for the server on which
the application is running.
Verify that the server protection is working correctly.
4.
Click Help to view online help.
HP UPS Network Module web interface 43