Configuring Snmp - Cisco Small Business RV315W Administration Manual

System Management

Configuring SNMP

STEP 5
Configuring SNMP
STEP 1
STEP 2
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Click Save to save your settings.
Simple Network Management Protocol (SNMP) is a network protocol used over
User Datagram Protocol (UDP) that lets you monitor and manage the RV315W
from a SNMP manager. SNMP provides a remote means to monitor and control the
network devices, and to manage the configuration, statistics collection,
performance, and security.
To configure SNMP:
Click System Management > SNMP. The SNMP page opens.
Enter the following information:
• SNMP: Click Enable to enable SNMP, or click Disable to disable SNMP. By
default, SNMP is disabled.
• SNMP Version: If you enable SNMP, specify the SNMP version. The
RV315W provides support for network monitoring using SNMP Versions 1,
2c, and 3. By default, SNMP v1&2 is selected.
• System Contact: Enter the name of the contact person for your RV315W.
• System Name: Enter the device name for easy identification of your
RV315W.
• System Location: Enter the physical location of your RV315W.
• Security Username: Enter the name of the administrator account with the
ability to access and manage the SNMP MIB objects. This is only available
for SNMPv3.
• Authentication Password: Enter the password of the administrator account
for authentication (the minimum length of password is 8 characters). This is
only available for SNMPv3.
• Authentication Method: Select either None or CBC-DES as the
authentication method.
• Encrypted Password: Enter the password for data encryption (the minimum
length of password is 8 characters). This is only available for SNMPv3.
9
98