Cisco Small Business RV315W Administration Manual page 21

Using the Setup Wizard
Configuring WAN Connection
STEP 3
STEP 4
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Choose WAN0 or WAN1 (only available when the WAN1/LAN0 port on the back
panel is set to a secondary WAN port) from the WAN Port drop-down menu to
connect to the Internet.
Choose a proper network addressing method from the Internet Connection Type
drop-down menu and specify the corresponding settings.
The following table provides the configuration instruction for each Internet
connection type. Confirm that you have proper network information from your ISP
or a peer router to configure the RV315W to access the Internet.
Connection Configuration
Type
DHCP Connection type often used with cable modems. Choose this
option if your ISP dynamically assigns an IP address on
connection, and enter the following information:
• Enable DNS Server: Click Enable to enable the DNS
server, or click Disable to disable this feature.
• Primary DNS Server: Enter the IP address of the
primary DNS server.
• Secondary DNS Server: (Optional) Enter the IP
address of the secondary DNS server.
2
18