Cisco Small Business RV315W Administration Manual page 81

Quality of Service (QoS)
Configuring Flow Control Policies
STEP 4
Cisco RV315W Broadband Wireless VPN Router Administration Guide
- VLAN: Controls flow based on the specified VLAN. If you choose this
option, choose a VLAN from the VLAN drop-down menu.
- Source IP Address: Controls flow based on the specified IP addresses
of the source hosts. If you choose this option, enter the starting and
ending IP addresses in the Start Address and End Address fields and
choose a LAN interface from the LAN Interface drop-down menu.
- Destination IP Address: Controls flow based on the specified IP
addresses of the destination hosts. If you choose this option, enter the
starting and ending IP addresses in the Start Address and End Address
fields and choose a LAN interface from the LAN Interface drop-down
menu.
• Application Queue: Choose an interface queue to which this flow control
policy applies.
• Enable Tag: Click Enable to prioritize network traffic, or click Disable to
disable this feature.
• Tag Value: Choose one of the following options to prioritize network traffic:
- CoS: Class of service (CoS) prioritizes network traffic by using the
specified CoS remarking value. If you choose this option, enter the CoS
remarking value in the field.
- DSCP: Differentiated Services Code Point (DSCP) prioritizes network
traffic by using the specified DSCP remarking value. If you choose this
option, enter the DSCP remarking value in the field.
Click Save to save your settings.
7
78