Cisco Small Business RV315W Administration Manual page 23

Using the Setup Wizard
Configuring WAN Connection
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Connection Configuration
Type
PPPoE Choose this option if your ISP provides the username and
password to connect to the Internet, and use the
corresponding information from your ISP to complete the
following fields:
• Username: Enter the username that is required to log
into the ISP.
• Password: Enter the password that is required to log
into the ISP.
• Service Name: Enter the name for the PPPoE service.
• Enable DNS Server: Click Enable to enable the DNS
server, or click Disable to disable this feature.
• Primary DNS Server: Enter the IP address of the
primary DNS server.
• Secondary DNS Server: (Optional) Enter the IP
address of the secondary DNS server.
• Keep Alive: Choose one of the following options:
- Connect on Demand: Let the RV315W disconnect
from the Internet after a specified period of
inactivity (Idle Time). This option is recommended if
your ISP fees are based on the time that you spend
online. If you choose this option, enter the idle time
in the Maximum Idle Time field. The default value is
300 seconds.
- Keep Alive: Keep the connection always on,
regardless of the level of activity. This option is
recommended if you pay a flat fee for your Internet
service. If you choose this option, enter the interval
to automatically reestablish the WAN connection
after the connection is down. The default value is 30
seconds.
2
20