Cisco Small Business RV315W Administration Manual page 41

Port Management
Configuring WAN
Cisco RV315W Broadband Wireless VPN Router Administration Guide
- Enable DNS Server: Click Enable to enable the DNS server, or click
Disable to disable this feature.
- Primary DNS Server: Enter the IP address of the primary DNS server.
- Secondary DNS Server: Enter the IP address of the secondary DNS
server.
• Static IP: Choose this option if the ISP provides you with a static
(permanent) IP address and does not assign it dynamically, and use the
corresponding information from your ISP to complete the following fields:
- IP Address: Enter the IP address of the WAN port that can be accessible
from the Internet.
- Subnet Mask: Enter the IP address of the subnet mask.
- Default Gateway: Enter the IP address of default gateway.
- Primary DNS Server: Enter the IP address of the primary DNS server.
- Secondary DNS Server: Enter the IP address of the secondary DNS
server.
• PPPoE: Choose this option if your ISP provides you with client software,
username, and password, and use the necessary PPPoE information from
your ISP to complete the PPPoE configuration:
- Username: Enter the username that is required to log into the ISP.
- Password: Enter the password that is required to log into the ISP.
- Service Name: Enter the name for the PPPoE service.
- Enable DNS Server: Click Enable to enable the DNS server, or click
Disable to disable this feature.
- Primary DNS Server: Enter the IP address of the primary DNS server.
- Secondary DNS Server: Enter the IP address of the secondary DNS
server.
- Keep Alive: Choose one of the following options:
Connect on Demand: Choose this option to let the RV315W disconnect
from the Internet after a specified period of inactivity (Idle Time). This
option is recommended if your ISP fees are based on the time that you
spend online. Enter the idle time in the Maximum Idle Time field. The
default value is 300 seconds.
4
38