Invacare Arrow RWD Service Manual page 52

PROCEDURE 10
22NF Batteries
REMOVING.
W
1. Remove the battery box(es). Refer to INSTALLING/
I
REMOVING 22NF BATTERY BOX in PROCEDURE
R
9 of this manual.
I
2. Cut the tie wrap that secures the rear portion of the
N
wiring harness and joystick cable to the rear of the
G
seat frame (DETAIL "A").
H
3. Perform one (1) of the following sections:
A
WHEELCHAIRS WITH MOTOR/GEARBOX ASSEMBLY
R
A. Cut tie-wraps A and B that secure the two (2)
N
motor/controller connections and the controller/
E
wiring harness connection (BLUE connectors)
S
together (DETAIL "B").
S
B. Cut tie-wrap C that secures the battery charger
cable, motor connector cable, controller connec-
tor cable, and wiring harness cable to the base
frame (DETAIL "B").
WHEELCHAIRS WITH GEARLESS/BRUSHLESS MOTOR
A. Cut tie-wrap A that secures the battery charger
cable to the base frame (DETAIL "C").
NOTE: For STEPS 4-6 refer to Detail "B" or "C".
4. Disconnect the battery harness/charger cable (BLUE)
from the controller connector (BLUE).
5. Remove the two mounting screws that secure the
charger cable to the mounting bracket.
6. Remove the wiring harness.
Installing
1. Secure the charger cable to the mounting bracket
with the two (2) mounting screws. Securely tighten
(DETAIL "B" or "C").
2. Connect the battery harness/charger cable (BLUE)
to the controller connector (BLUE) (DETAIL "B" or
"C").
3. Perform one (1) of the following sections:
WHEELCHAIRS WITH MOTOR/GEARBOX ASSEMBLY
A. Group the two (2) motor/controller connections
together along with the controller/wiring har-
ness connection (BLUE) and secure with TIE-
WRAPS A and B (DETAIL "B").
B. Secure the Wiring Harness Cable, Battery
Charger Cable, Controller Connector Cable,
and Motor Connector Cable to the suspension
arm with TIE-WRAP C (DETAIL "B").
WHEELCHAIRS WITH GEARLESS/BRUSHLESS MOTOR
A. Secures the battery charger cable to the base
frame with TIE-WRAP A (DETAIL "C").
4. Tie-wrap NEW wiring harness and joystick cable to
the rear of the seat frame (DETAIL "A").
5. Reinstall the battery box(es). Refer to INSTALLING/
REMOVING 22NF BATTERY BOX in PROCEDURE
9 of this manual.
52
WIRING HARNESS
OPTION: