Motor Locks/Wheel Locks; Disengaging/Engaging Motor Lock Levers - Invacare FDX User Manual

Power wheelchair base
Hide thumbs Also See for FDX:
Table of Contents

Advertisement

6 Motor Locks/Wheel Locks

WARNING
After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely -
otherwise injury or damage may result.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced.
6.1

Disengaging/Engaging Motor Lock Levers

WARNING
DO NOT engage or disengage motor locks until the power is in the OFF position.
For this procedure, refer to FIGURE 1 on page 58.
Motor lock disengagement/engagement allows free-wheeling or joystick controlled operation. Free-wheeling allows an
assistant to maneuver the wheelchair without power.
Motor lock levers are located between the rear caster assembly and drive wheel on both sides of the wheelchair.
1.
Perform one of the following as if viewing the motors from behind the wheelchair (Detail "A"):
Engage (DRIVE) - Move the motor lock levers DOWN to engage the motors and drive the wheelchair.
Disengage (PUSH) - Move the motor lock levers UP to disengage the motors and push the wheelchair.
Part No 1163181
57
6 MOTOR LOCKS/WHEEL LOCKS
Invacare® FDX®

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fdx-cgFdx-mcg

Table of Contents