Installing Networking Software on the CE
To install the networking software, follow these steps:
Step
Action
1
On the CE, install the Endurance Ethernet
Redirector using the Add New Hardware
Wizard.
a. Using the Control Panel, start the Add/
Remove Hardware Wizard.
b. Click Add/Troubleshoot a device.
c. Click Add a new device.
d. Select No, I want to select hardware from
a list.
e. Select Network Adapters, then Have Disk.
f. On the CE boot drive, browse to
drive\folder\system32\drivers\
MtcPnP\netmtcethr.inf .
g. Select Endurance Ethernet Redirector
(MtcEthR).
h. Ignore the warning Digital Signature Not
Found, and continue with the installation.
The installation for the Ethernet Redirector
completes.
2
Repeat step 1 for the number of redirected
Ethernet adapters that you have.
Installing Windows and the Endurance Software
Notes
Perform these steps from within the CE
Desktop window on the IOP. You may
want to consider running the CE
Desktop in full-screen mode.
3-29