HP NetServer AA 4000 Installation Manual page 66

Completing Software Installation on the CEs
Note: You do not install CE software on the second CE. The IOPs update the disks via
a mirror copy.
After the Windows Unattended Installation completes, the CE reboots, and video is redirected
to the CE Desktop application on the IOP. To view CE video output, you must ensure that
the CE Desktop application is running on the IOPs.
At this time, you will complete steps that could not be performed during the Unattended
Installation:
• Installing the Appropriate Service Pack on the CE
• Installing Networking Software on the CE
Installing the Appropriate Service Pack on the CE
Install one of the currently supported Windows Service Packs and any applicable Microsoft
hotfixes on the CE.
Note: Perform this step if you did not slip stream the Windows installation.
For a complete list of supported Service Packs, refer to the
Continue with Installing Networking Software on the
3-28
Endurance Release
CE.
HP Netserver AA Solution Installation Guide
Notes.