HP NetServer AA 4000 Installation Manual page 56

Step Action
Only when configuring IOP2:
1
Click Start
Endurance
2 Use the Configuration Utility to specify IOP2
Ethernet addresses instead of IOP1, and configure
the network adapters. Optionally, you can open the
Configuration file you saved from IOP1 to configure
devices on IOP2:
1. Select Network Adapters.
2. From the list, select the Ethernet adapter you
want to configure.
3. Click Remove to delete the Ethernet adapter
address on IOP1.
4. Click Add, and select the appropriate adapter
on IOP2.
5. Repeat this procedure for each entry you see
under Network Adapters in the Endurance
Configuration Utility.
6. Select Commit.
Continue with Completing the IOP
3-18
Programs Marathon
Endurance Configuration Utility.
Installation.
Notes
The steps in this section apply only to
configuring IOP2. They are not
performed when configuring IOP1.
Except for the Ethernet addresses, on
each IOP the configuration files must be
identical; otherwise, the IOPs fail to
join, and the CEs cannot be booted.
HP Netserver AA Solution Installation Guide