HP NetServer AA 4000 Installation Manual page 33

Step Action
9 Specify the identity of the MIC.
10 Insert your MIC utilities diskette in the
floppy drive, and restart the CE.
11 Run MTCFLASH to update the MIC
firmware: type MTCFLASH -f.
12 Remove the MIC utilities diskette.
Continue with Cabling the Endurance
Installing the Hardware
Notes
The MIC BIOS Utility starts automatically
whenever the MIC does not have an identity
setting. Refer to
AA Solution Administrator's
Specify CE1 or CE2 to correspond with the
intended role of the CE you are building.
Warning: Once you start MTCFLASH, it must
For more information about this utility, refer to
Chapter 7
Administrator's
Server.
Chapter 7 in the
Guide.
run to completion without
interruption.
of the HP Netserver AA Solution
Guide.
HP Netserver
2-5