Removing blades and I/O bays from an nPartition using the OA GUI
To unassign blades and I/O bays from an nPartition using the OA GUI:
1.
Select the nPartition from the left navigation pane, and then click modify nPartition.
2.
Expand the Blade Resources option.
Figure 9 (page 44)
Figure 1 1 Blade Resources Option
3.
Clear the blade resources that you want to unassign from the nPartition.
4.
Expand the IOX Resources option.
Figure 10 (page 45)
46
Creating and configuring nPartitions
shows the blade resource screen.
shows the IOX Resources screen.