Task Summaries For Rebooting And Resetting Partitions - HP Integrity Superdome 2 16-socket Administrator's Manual

M 003 Mac(002655A9CA32) PcieRoot(0x3)/Pci(0x2,0x0)/Pci(0x0,0x0)/MAC(002655A9CA32,0x0)
004 Mac(002655A9CA36) PcieRoot(0x3)/Pci(0x2,0x0)/Pci(0x0,0x1)/MAC(002655A9CA36,0x0)
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl

Task Summaries for Rebooting and Resetting Partitions

Table 6 describes the main nPartition boot and reset tasks and provides brief summaries and
references for detailed procedures.
You can perform the nPartition boot tasks in
GUI.
Table 6 nPartition Boot and Reset Task Summaries
Task
POWERON (pe)
POWEROFF (pe)
REBOOT (rs)
SET PARTITION DVD
TOC (tc)
UPDATE SHOW
SHOW PARTITION DVD
SHOW PARTITION INFO
UPDATE NPARTITION
UPDATE SHOW NPARTITION
UPDATE FIRMWARE
UPDATE SHOW FIRMWARE
1 When any of the 2-letter equivalents for POWERON/POWEROFF/TOC/REBOOT (namely, pe, tc, and rs respectively)
are executed without any arguments, a list of available partitions on which the command may be excercised are
displayed.
60 Booting and resetting Partitions (nPartitions and vPars)
Summary
1
Boots the partition. See
Shuts down the partition. See
Reboots the OS on the specified nPartition or virtual partition. See
PARTITION" (page
Connect or disconnect the DVD module to the specified partition. See
PARTITION DVD" (page
Performs a transfer-of-control reset of the specified nPartition or virtual
partition. See
(page
Displays information about the TRAY, LCD, FAN and so on. See
SHOW NPARTITION" (page
Displays information about the DVD drive attached to the specified partition.
See
Displays information about the specified partition(s). See
INFO" (page
The UPDATE NPARTITION command downloads a new flash image from
the network or a USB drive attached to the DVD module, or a DVD in the
enclosure DVD drive in the monarch enclosure and uses it to update the
firmware for HP Superdome 2 cell blades within the specified partitions.
See"UPDATE NPARTITION" (page
Displays the version of the firmware bundle currently installed on the server
blades within the specified partitions. See
(page
Updates the Superdome system's firmware (except I/O firmware). See
"UPDATE FIRMWARE" (page
Displays the configured Superdome firmware version and lists any of the
following Superdome 2 devices whose installed firmware version differs
from the system's configured firmware version: blade, XFM, SIOX, OA,
GPSM. See
Table 6 (page 60)
"POWERON PARTITION" (page
"POWEROFF PARTITION" (page
64).
65).
"Force System Reset and Crash Dump (TOC) PARTITION"
69).
72).
"SHOW PARTITION DVD" (page
69).
72).
72).
"UPDATE SHOW NPARTITION" (page
using either the OA CLI or the OA
64).
67).
"SHOW PARTITION
70).
"UPDATE SHOW NPARTITION"
72).
61).
"REBOOT
"SET
"UPDATE