Auto Roast - GE JE1468L Use And Care & Cooking Manual

Auto Roast uses the temperature probe to cook
to the desired serving temperature. Unlike Temp
Cook & Hold, which uses a single power level,
Auto Roast uses up to 3 power settings which
automatically switch during roasting, thus
providing even, tender cooking results without
overcooking.
Preparing Roasts for Auto Roasting
Place tender beef
roast in cooking
bag on trivet in
microwave-safe
dish. (Refer to
package instructions
for proper use of
cooking bag. ) Insert
probe through cooking bag horizontally into the
center meaty area not touching bone or fat. Make
sure the handle does not touch the food or top or
sides of the oven.
How to Auto Roast Beef Roast to Medium
Step 1: Touch AUTO ROAST pad.
Touch number pad 1. Touch START.
(See the "Auto Roast Guide" for
NOTE: By touching
the AUTO ROAST
pad during cooking,
the meat's internal
temperature will be
is released, doneness code reappears on the display.
Step 2: When you select
Auto Roast codes 1 or 2,
the oven signals with 4
flashes on the display
when it's time to turn the
roast over. After you turn the roast, close the door and
touch START. (NOTE: Oven continues to cook after
the signal whether or not roast is turned over.)
16
Just as in regular roasting, only tender roasts should
be Auto Roasted until specified internal temperatures
are reached. Less tender roasts should be microwaved
by time.
Place pork roast
in cooking bag
and place in
microwave-safe
dish.
Place meat in
oven with probe
to the right. Insert
cable end of probe
firmly into
receptacle on
oven wall.
Step

AUTO ROAST

pre-programmed
food temperature is
reached, oven beeps
4 times and "HOLd"
CODE oven then beeps 4 times
and "End" appears.
CODE
After a