Adding A Security Threshold - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

13

Adding a Security threshold

Adding a Security threshold
NOTE
This threshold is only available for M-EOS devices.
To add a Security threshold, complete the following steps.
1. Select Configure > Port Fencing.
2. Select Security from the Violation Type list.
3. Click Add.
4. Enter a name for the threshold in the Name field.
5. Select the number of port events allowed for the threshold from the Threshold errors list.
6. Select the time limit for the threshold from the violations per list.
7.
8. Click OK on the Port Fencing dialog box.
338
The Port Fencing dialog box displays.
The Add Security Threshold dialog box displays
FIGURE 132
Add Security Threshold dialog box
Click OK to add the security threshold to the table and close the Add Security Threshold dialog
box.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 339.
(Figure 126).
"Assigning thresholds"
DCFM Enterprise User Manual
on
53-1001775-01