Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 577

7.
FIGURE 232
8. Note Important Next Steps! below this message, and click Next.
DCFM Enterprise User Manual
53-1001775-01
Click Next to confirm the displayed information.
The Configuration Status displays.
•
A progress indicator shows that a configuration step is in progress. A green check mark
indicates successful completion of all steps for that Configuration Item. A red stop sign
indicates a failed step.
•
All Configuration Items have green check marks if the configuration is successful. A
message displays below the table, indicating that the encryption switch was added to the
group you named, and the public key certificate is stored in the location you specified.
Add switch to an encryption group - Configuration Status dialog box
Instructions for installing public key certificates for the encryption switch are displayed. These
instructions are specific to the key vault type. Copy or print these instructions.
Adding a switch to an encryption group
20
539