Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 348

11
Creating a threshold policy
2. Click Add.
3. Enter a name for the policy (100 characters maximum) in the Name field.
4. Select a policy type from the Policy Type list.
5. Select a measure from the Measure list.
6. Enter a percentage for the high boundary in the High Boundary field.
310
FIGURE 117
Set Threshold Policies dialog box
The New Threshold Policy dialog box displays.
FIGURE 118
New Threshold Policy dialog box
You can only define policies for E and F/FL ports.
You can only define policies for the Tx and Rx % Utilization measures. You cannot add the same
measure more than once. If you try to add another threshold with the same measure, the new
values overwrite the older threshold values in the Selected Thresholds table.
When the counter value exceeds high boundary, an event is raised.
DCFM Enterprise User Manual
53-1001775-01