HP Cisco Catalyst Blade Switch 3020 Release Note page 20

Documentation Updates
Error Message AUTHMGR-5-MACREPLACE: MAC address ([enet]) on Interface [chars] is
replaced by MAC ([enet])
Error Message MAB-5-FAIL: Authentication failed for client ([chars]) on Interface
[chars] AuditSessionID [chars]
Error Message MAB-5-SUCCESS: Authentication successful for client ([chars]) on
Interface [chars] AuditSessionID [chars]
Deleted System Messages
Error Message IP-3-STCKYARPOVR: Attempt to overwrite Sticky ARP entry: [inet], hw:
[enet] by hw: [enet]\n", MSGDEF_LIMIT_FAST
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(58)SE and Later
20
Explanation A new client has triggered a violation that caused an existing client to be replaced. The
first [enet] is the first client, [chars] is the interface, the second [enet] is the new client.
No action is required.
Recommended Action
Explanation Authentication was unsuccessful. The first [chars] is the client, the second [chars] is the
interface, and the third [chars] is the session ID.
No action is required.
Recommended Action
Authentication was successful. The first [chars] is the client, the second [chars] is the
Explanation
interface, and the third [chars] is the session ID.
No action is required.
Recommended Action
Multiple stations are configured with the same IP address in a private VLAN. (This
Explanation
could be a case of IP address theft.) [inet] is the IP address that is configured, the first [enet] is the
original MAC address associated with the IP address, and the second [enet] is the MAC address that
triggered this message.
Change the IP address of one of the two systems.
Recommended Action
OL-24325-01