HP Cisco Catalyst Blade Switch 3020 Release Note page 19

Error Message VLMAPLOG-6-ICMP: vlan [dec] (port [chars]) denied icmp [inet] -> [inet]
([dec]/[dec]), [dec] packet[chars]
Error Message VLMAPLOG-6-IP: vlan [dec] (port [chars]) denied ip protocol=[dec]
[inet] -> [inet], [dec] packet[chars]
Error Message AUTHMGR-7-STOPPING: Stopping '[chars]' for client [enet] on Interface
[chars] AuditSessionID [chars]
Error Message AUTHMGR-7-NOMOREMETHODS: Exhausted all authentication methods for
client ([chars]) on Interface [chars] AuditSessionID [chars]
Modified System Messages
Error Message AUTHMGR-5-MACMOVE: MAC address ([enet]) moved from Interface [chars]
to Interface [chars]
OL-24325-01
Explanation A packet from the VLAN that matches the VLMAP log criteria was detected. The first
[dec] is the VLAN number, the first [chars] is the port name, the first [inet] is the source IP address,
the second [inet] is the destination IP address, the second [dec] is the Internet Control Message
Protocol (ICMP) message type, the third [dec] is the ICMP message code, the fourth [dec] denotes
the number of packets, and the second [chars] represents the letter "s" to indicate more than one
packet.
No action is required.
Recommended Action
A packet from the VLAN that matches the VLMAP log criteria was detected. The first
Explanation
[dec] is the VLAN number, the first [chars] is the port name, the second [dec] is the protocol number,
the first [inet] is the source IP address, the second [inet] is the destination IP address, the third [dec]
denotes the number of packets, and the second [chars] represents the letter "s" to indicate more than
one packet.
Recommended Action No action is required.
Explanation The authentication process has been stopped. The first [chars] is the authentication
method, [enet] is the Ethernet address of the host, the second [chars] is the interface for the host,
and the third [chars] is the session ID.
No action is required.
Recommended Action
All available authentication methods have been tried. The first [chars] is the client
Explanation
identifier, the second [chars]s is the interface for the client, and the third [chars] is the session ID.
Recommended Action No action is required.
The client moved to a new interface but did not log off from the first interface. [enet] is
Explanation
the MAC address of the client, the first [chars] is the earlier interface, and the second [chars] is the
newer interface.
No action is required.
Recommended Action
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(58)SE and Later
Documentation Updates
19