Documentation Updates
Updates to the System Message Guide
New System Messages
Error Message IP-3-SBINIT: Error initializing [chars] subblock data structure.
[chars]
Error Message VLMAPLOG-6-ARP: vlan [dec] (port [chars]) denied arp ip [inet] ->
[inet], [dec] packet[chars]
Error Message VLMAPLOG-6-L4: vlan [dec] (port [chars]) denied [chars] [inet]([dec])
-> [inet]([dec]), [dec] packet[chars]
Error Message VLMAPLOG-6-IGMP: vlan [dec] (port [chars]) denied igmp [inet] -> [inet]
([dec]), [dec] packet[chars]
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(58)SE and Later
18
Explanation
The subblock data structure was not initialized. [chars] is the structure identifier.
No action is required.
Recommended Action
A packet from the virtual LAN (VLAN) that matches the VLAN access-map (VLMAP)
Explanation
log criteria was detected. The first [dec] is the VLAN number, the first [chars] is the port name, the
first [inet] is the source IP address, the second [inet] is the destination IP address, the second [dec]
denotes the number of packets, and the second [chars] represents the letter "s" to indicate more than
one packet.
No action is required.
Recommended Action
A packet from the VLAN that matches the VLMAP log criteria was detected. The first
Explanation
[dec] is the VLAN number, the first [chars] is the port name, the second [chars] is the protocol, the
first [inet] is the source IP address, the second [dec] is the source port, the second [inet] is the
destination IP address, the third [dec] is the destination port, the fourth [dec] denotes the number of
packets, and the third [chars] represents the letter "s" to indicate more than one packet.
No action is required.
Recommended Action
A packet from the VLAN that matches the VLMAP log criteria was detected. The first
Explanation
[dec] is the VLAN number, the first [chars] is the port name, the first [inet] is the source IP address,
the second [inet] is the destination IP address, the second [dec] is the Internet Group Management
Protocol (IGMP) message type, the third [dec] denotes the number of packets, and the second [chars]
represents the letter "s" to indicate more than one packet.
Recommended Action
No action is required.
OL-24325-01