Oam Global Timer Hello; Oam Global Timer Keepalive - HP 6125XLG Command Reference Manual

oam global timer hello

Use oam global timer hello to configure the global Ethernet OAM handshake packet transmission
interval.
Use undo oam global timer hello to restore the default.
Syntax
oam global timer hello interval
undo oam global timer hello
Default
The global Ethernet OAM handshake packet transmission interval is 1000 milliseconds.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Specifies the Ethernet OAM handshake packet transmission interval, in steps of 100 (in
milliseconds). The value range for this argument is 500 to 5000.
Usage guidelines
After the timeout timer of an Ethernet OAM connection expires, the local OAM entity ages out its
connection with the peer OAM entity, causing the OAM connection to disconnect. To keep the Ethernet
OAM connections stable, HP recommends that you set the connection timeout timer at least five times the
handshake packet transmission interval.
The configuration in system view takes effect on all ports, but has a lower precedence than the
configuration in interface view.
Examples
# Set the Ethernet OAM handshake packet transmission interval to 600 milliseconds.
<Sysname> system-view
[Sysname] oam global timer hello 600
Related commands
display oam configuration
•
oam timer hello
•

oam global timer keepalive

Use oam global timer keepalive to configure the global Ethernet OAM connection timeout timer.
Use undo oam global timer keepalive to restore the default.
Syntax
oam global timer keepalive interval
undo oam global timer keepalive
23