Ethernet Oam Commands; Display Oam - HP 6125XLG Command Reference Manual

Ethernet OAM commands

display oam

Use display oam to display the information about an Ethernet OAM connection, including connection
status, information contained in Ethernet OAM packet header, and Ethernet OAM packet statistics.
Syntax
display oam { local | remote } [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
local: Displays the Ethernet OAM connection information of the local end.
remote: Displays the Ethernet OAM connection information of the remote end.
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If you do not specify the interface keyword, this command displays information about all the Ethernet
OAM connections.
Examples
# Display information about the Ethernet OAM connection established on all local ports.
<Sysname> display oam local
----------- [Ten-GigabitEthernet1/1/5] -----------
Enable status
Loopback status
Link status
OAM mode
PDU
Mux action
Par action
# Display information about the Ethernet OAM connection established on the local port
Ten-GigabitEthernet 1/1/5.
<Sysname> display oam local interface ten-gigabitethernet 1/1/5
Enable status
Loopback status
Link status
OAM mode
PDU
: Enable
: No loopback
: UP
: Active
: ANY
: FWD
: FWD
: Enable
: No loopback
: UP
: Active
: ANY
1