Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If you do not specify the interface keyword, this command displays the statistics for the critical Ethernet
OAM link events that occurred on all the ports of the switch.
Examples
# Display the statistics on critical Ethernet OAM link events occurred on all the ports.
<Sysname> display oam critical-event
----------- [Ten-GigabitEthernet1/1/5] -----------
Local link status
Event statistics
Link fault
Dying gasp
Critical event
Table 4 Command output
Field
Ten-GigabitEthernet1/1/5
Local link status
Event statistics
Link fault
Dying Gasp
Critical Event
display oam link-event
Use display oam link-event to display the statistics on Ethernet OAM link error events occurred on a local
port or a peer port. Ethernet OAM link error events include errored symbol events, errored frame events,
errored frame period events, and errored frame seconds events.
Syntax
display oam link-event { local | remote } [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
local: Displays the statistics on the local Ethernet OAM link error events.
remote: Displays the statistics on the peer Ethernet OAM link error events.
interface interface-type interface-number: Specifies a port by its type and number.
: UP
: Not occurred
: Not occurred
: Not occurred
Description
Information on Ten-GigabitEthernet 1/1/5.
Local link status, up or down.
Statistics on critical Ethernet OAM link events.
Indicates whether a link fault is present.
Indicates whether a fatal fault is present.
Indicates whether a critical fault is present.
7